AgroLUX ALF1000 DE Reflector with Philips GreenPower Plus Lamp
Veg: 6' x 6'
Flower: 5' x 5'
Philips GreenPower Plus Lamp Included
240 / 277 Volt
So much light from just one luminaire! The electronic pre-connected lighting luminaires are provided with their own Philips electronics, a semi-open reflector (from Germany) with a heat shield, and a double-ended 1000 watt bulb from Philips.
With the ALF1000 lighting luminaire, Agrolux once again proves that it is very capable of innovation. The ALF1000 2.1 is completely new and deviates from the beaten path. The electronic pre-connected lighting luminaires are provided with their own Philips electronics, a semi-open reflector (from Germany) with a heat shield, and a double-ended 1000watt bulb from Philips.
The ALF1000 housing is made of powder-coated white aluminum and is extremely compact in design. With the use of energy-efficient electronics, a big cooling fins’ surface, and a heat shield, it stays remarkably cool. Do not let your decision be based on the position of the electronics but on the information we as a company can provide.
The ALF1000-luminaires are equipped with an electronic pre-switched ballast. Typical of the ALF1000 is the position of the electronic pre-switched ballast. As a standard, the electronic ballast used is supplied with a voltage protector, making damage due to overvoltage a thing of the past. Even in the case of voltage fluctuating, the electronics ensure a constant output. Agrolux uses its own EVSAs or Philips-drivers.
Low Inrush Current
All luminaires are supplied with low inrush current. The inrush current is the peak load that occurs when starting up an installation. By using a low inrush current it is possible to use cheaper switch materials.
Semi-Closed Reflector System
ALF1000’s reflector system is semi-closed. The system was developed and produced in Germany and ensures that the temperature of the bulb does not rise too high (maximum of ca. 500 degrees). If the temperature of the bulb gets too high (higher than 550 degrees) it can result in early wear and tear.
To ensure that the electronics stay cool, a heat shield is fitted on the reflector. The reflector can be dissembled very easily and can be easily cleaned.
The bulbs used are from the AUVL and Philips brands. The bulbs are delivered in the so-called double-ended design. The output of the AUVL/Philips-bulb improves every year; currently, the warranty value is 2100umol at 100 hours. The bulbs have a warranty of four years with a maximum of 10 000 burning hours for these four years. The 1000w-bulb of AUVL and Philips are interchangeable.
Installation of the Luminaires
The installation of the luminaires is simple. All our luminaires are equipped with Wieland-plug systems. This dust- and waterproof plug-and-play system, ensures faster and safer installation.